Sheets Ot63

OT63 - Hard and half-hard - Uni EN 1652

measures	measures	measures	measures
mm. 0,10x670x1340 mm. 0,15x670x1340 mm. 0,20x670x1340 mm. 0,25x670x1340 mm. 0,30x670x1340 mm. 0,40x670x1340 mm. 0,4x1000x2000 mm. 0,5x670x1340 mm. 0,5x1000x2000 mm. 0,6x670x1340 mm. 0,6x1000x2000 mm. 0,7x670x1340 mm. 0,7x1000x2000	mm. 0,8x670x1340 mm. 0,8x1000x2000 mm. 0,9x670x1340 mm. 0,9x1000x2000 mm. 1x670x1340 mm. 1x1000x2000 mm. 1x1000x3000 mm. 1x1220x3000 mm. 1,2x670x1340 mm. 1,2x1000x2000 mm. 1,2x1000x3000 mm. 1,5x670x1340 mm. 1,5x1000x2000	mm. 1,5x1000x3000 mm. 1,5x1220x3000 mm. 1,8x670x1340 mm. 1,8x1000x2000 mm. 2x670x1340 mm. 2x1000x2000 mm. 2x1000x3000 mm. 2x1220x3000 mm. 2,5x670x1340 mm. 2,5x1000x2000 mm. 3x670x1340 mm. 3x1000x2000 mm. 3x1000x3000	mm. 4x670x1340 mm. 4x1000x2000 mm. 5x670x1340 mm. 5x1000x2000 mm. 6x670x1340 mm. 6x1000x2000 mm. 8x670x1340 mm. 8x1000x2000 mm. 10x670x1340 mm. 10x1000x2000 mm. 12x670x1340 mm. 15x670x1340

OT63 - Soft - Uni EN 1652

measures	measures	measures	measures
mm. 0,10x670x1340 mm. 0,15x670x1340 mm. 0,20x670x1340 mm. 0,25x670x1340 mm. 0,30x670x1340 mm. 0,40x670x1340 mm. 0,4x1000x2000 mm. 0,5x670x1340 mm. 0,5x1000x2000 mm. 0,6x670x1340	mm. 0,6x1000x2000 mm. 0,7x670x1340 mm. 0,7x1000x2000 mm. 0,8x670x1340 mm. 0,8x1000x2000 mm. 0,9x670x1340 mm. 0,9x1000x2000 mm. 1x670x1340 mm. 1x1000x2000 mm. 1,2x670x1340	mm. 1,2x1000x2000 mm. 1,5x670x1340 mm. 1,5x1000x2000 mm. 1,8x670x1340 mm. 2x670x1340 mm. 2x1000x2000 mm. 2,5x670x1340 mm. 2,5x1000x2000 mm. 3x670x1340 mm. 3x1000x2000	mm. 4x670x1340 mm. 4x1000x2000 mm. 5x670x1340 mm. 5x1000x2000 mm. 6x670x1340 mm. 6x1000x2000 mm. 8x670x1340 mm. 8x1000x2000 mm. 10x670x1340 mm. 10x1000x2000

The plates the sheets are produced from are basically in the widths: 500 – 670 – 1000 – 1220 – 1250. Upon request for reasonable quantities it is possible to provide sheets of other lengths

We can also provide the mechanically mirror-polished sheets both with or without protective film.

The shear and disk cutting are available. We supply sheets designed to measure by the client.

The Ot63 is the brass alloy widely used for cold forming due to its lower price compared to other alloys.It is used for fasteners devices, industrial refrigerations, heat exchangers, component items for electricity industry, connectors end shaped parts.

DETECTION QUOTATION METALS

under costruction